To start, the HSP Hot Side Intercooler Pipe is made from a 3” mandrel-bent tube. The reason we did this is to increase the flow but also because we were able to make sweeping style bends. The sweeping style bends allow the air to flow more freely (up to 40%) and as we all know the less turbulence we have in the air flowing through the tube the more power we can make and the safer we can make that power. Another thing that HSP Diesel has done that has made a massive difference over the stock pipe is we took the prone to fail factory lower intercooler boot and made a straight style connection to the intercooler, this removes the possibility of an issue with the silicone boot and removes a failure point giving you more reliability and peace of mind. With all of those changes we get a few add ons that happen, we notice a difference in engine and turbo sounds. We get a crisper more distinct tone with our Hot Side Intercooler Pipe installed. HSP Diesel also offers this Hot Side Intercooler pipe in a variety of colors and even custom colors, this gives you some engine bay clean up and color.
3'' Mandrel Bent hot-side tube
(1) 3"x4" Straight Boot (430-RFAB)
(1) 2.25" to 3" reducer Boot (441-RFAB)
(1) 2.25" T-bolt Clamp (420-RFAB)
(3) 3" T-bolt Clamp (422-RFAB)
HSP “NO BS” LIMITED LIFETIME WARRANTY
At HSP we believe in our products and we stand firmly behind every single one that leaves our facility. For years we have taken care of almost everything & anything that our customers had issues with, but we didn’t have a “set in stone” warranty. We have always gone above and beyond for our customers which set us apart from the rest. We will continue that same standard, but now we are taking things to the next level. Below you will be able to clearly read & understand our “No BS” warranty, its process, and the guidelines in which to follow.