Home - Return to Previous Page
Click on image to zoom

Stage 2 10L1000 (850HP)

LDP-stag210l1000
The 10L1000 has many short comings that cause failures with or without engine tuning with common issues seen from the E clutch, torque converter and main drum just to name a few. They are a very problematic transmission. Unfortunately a fact of life of every 10 speed owner even in stock applications is the inevitable main drum wear and eventual failures as a result of the wear. However with the right upgrades and build quality they can be made to be a much more reliable transmission. With our 10L1000's we offer everything we feel necessary for a reliable rebuild for your application. This Inglewood Transmission Stage 2 is currently the strongest variation of the 10L1000 possible. In house installation and programming is an additional an $1500

D&P,Suncoast or Goerend triple disc converter
Revmax billet e hub
Steel inserted shell to ELIMINATE the most common internal failure point (anodized and other coated drums just mask the issue)
Extra capacity GPZ high performance clutches
Factory seals, bushings, bearings, gaskets
Brand new OEM valve body with Ratiotek modifications
New oil pump
New CDF Triple drum
New electronics
New sensors
PPE pan
Sonnax Solenoid Stabilization Clip Insert
Sonnax Solenoid Stabilization Retainer
Sonnax TCC Regulator Valve Spring
Availability: Our 10L1000 builds are for in-house drive-in customers or customers shipping in/bringing in a good rebuildable core only. Installation is $1500 with hot flush, fluid and fast learn. Pricing is based on the customer having a good rebuildable core. Call or text (714) 725-8907 to schedule. Turnaround time is generally two to 4 days from the date of drop off. This transmission has a 3 year unlimited mile warranty
Pricing: $11,900.00

Customize Your Item

Shipping/Core return *
10L1000 triple disc *
Warranty *
Hot Flush *
Commercial shipping address *
5 year unlimited mile warranty *
Qty:

Description

D&P,Suncoast or Goerend triple disc converter
Revmax billet e hub
Steel inserted shell to ELIMINATE the most common internal failure point (anodized and other coated drums just mask the issue)
Extra capacity GPZ high performance clutches
Factory seals, bushings, bearings, gaskets
Brand new OEM valve body with Ratiotek modifications
New oil pump
New CDF Triple drum
New electronics
New sensors
PPE pan
Sonnax Solenoid Stabilization Clip Insert
Sonnax Solenoid Stabilization Retainer
Sonnax TCC Regulator Valve Spring

Warranty

Inglewood Transmission warrants components against defects in our workmanship and materials used in accordance with the terms and limitations below for 3 years:

- The torque converter will only be warranted by the original manufacturer (Suncoast,Goerend, etc.) and NOT by Inglewood Transmission.
- All claims related to defects in the torque converter shall be made directly with the product manufacturer and not with Inglewood Transmission.
- Inglewood Transmission does not warranty any failures due to or related to broken, sheared, fractured shafts, hard parts and/or cases; or any damage caused by broken shafts, hard parts, or cases.
- Inglewood transmission will not warranty any main cases, extension housings or bellhousings that have cracked or have been compromised.
- Inglewood Transmission will not warranty damage caused by exceeding the power capacity of that particular transmission (overpowering).
- Inglewood Transmission will not warranty any damages resulting from improper installation, negligence, alterations, accidents or improper use or abuse.
- Inglewood Transmission does not warranty any failures due to no transmission tuning/improper transmission tuning/pressures/Pressure mapping
- Inglewood Transmission does not warranty any failures due to oversized tires without proper regearing.
- If the vehicle's transmission lines and transmission cooler were not hot flushed or replaced prior to installation of the new unit it will not be covered under Inglewood Transmissions warranty.
- Inglewood Transmission will not provide warranty repair or service to any owner without properly documented maintenance records (provided by a qualified automotive service technician) that show all of the following:

1. Maintenance was performed at Inglewood Transmission's recommended intervals of 25,000 miles using proper fluid for the application and OEM GM filters.


WARRANTY LIMITED TO REPAIR Inglewood Transmissions liability under this warranty is solely limited to repair or replacement of defective parts and/or workmanship. Inglewood Transmission shall not be liable for any incidental, special, or consequential, or punitive damages including any and all towing charges. Freight cost and subsequent removal and reinstall labor charges. Any labor or services or parts purchased not conducted inside Inglewood Transmissions facility are the consumers' liability. Any repairs to a transmission not authorized by Inglewood Transmission will void warranty and will not be covered by Inglewood Transmission.

This warranty is made to the original purchaser of the transmission and is tied to the VIN provided at time of purchase.

Details

  • LDP-stag210l1000
  • LDP-stag210l1000
  • Our 10L1000 builds are for in-house drive-in customers or customers shipping in/bringing in a good rebuildable core only. Installation is $1500 with hot flush, fluid and fast learn. Pricing is based on the customer having a good rebuildable core. Call or text (714) 725-8907 to schedule. Turnaround time is generally two to 4 days from the date of drop off. This transmission has a 3 year unlimited mile warranty
  • New

Categories

Shipping Information

  • Item Requires Shipping

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.